Why install the filter on the electric regulating valve


Release time:

2024-10-30 15:21

Electric control valve cleaning before installation

Before the electric control valve equipment, it is necessary to admit that the pipeline is clean. Because under unclean conditions, the abnormal substances in the pipeline may destroy the sealed surface and block the valve core, while the valve ball may form a valve closure error under the movement of the disc plate. Therefore, it is one of the most important operations to reduce the danger to the low limit, so it is necessary to clean all the pipelines before the valve equipment. After cleaning, the pipeline should be checked to guide all foreign matters to no longer exist.

 

It is necessary to pay attention to whether the equipment orientation of the electric control valve is in line with the requirements of the technological process when the electric control valve is in equipment. There are relevant electrical equipment construction specifications for the electrical equipment. It is necessary to strictly implement the equipment in accordance with these rules and regulations. In the application and repair process of the electric control valve, the explosive place is to carefully open the cover and repair the point. In the process of disassembly and assembly, knocking and prying are definitely not allowed on the explosion-proof surface in order to install it.

Although the electric control valve has adopted strict maintenance methods in the production and manufacturing process, there have been many foresight about the damage in the transportation process. Nevertheless, there is no 100 guarantee that these damage phenomena will be eradicated. Therefore, it is necessary for equipment personnel to pay attention to these possible phenomena and have adopted relevant countermeasures.