Learn about the application field of electric valves
Release time:
2024-10-22 16:18
Electric valves are generally composed of electric actuators and valves. The electric valve uses electric energy as power to drive the valve through the electric actuator to complete the switching action of the valve. So as to reach the purpose of the switch of the pipeline medium. Solenoid valve is a variety of electric valve; it uses the magnetic field generated by the electromagnetic coil to pull the valve core, thereby changing the on-off of the valve body, the coil is de-energized, and the valve core is backed by the pressure of the spring.
Application field: Electric valve is used for analog conditioning of medium flow in liquid, gas and wind systems. It is operated by AO. In the control of large valves and wind systems, electric valves can also be used to do two switch control. PREPARATION BEFORE OPERATIONAL METHOD Before operating the valve, read the operating instructions carefully.
Be sure to clear the flow direction of the gas before operation, and pay attention to check the valve opening and closing signs. Check the appearance of the electric valve to see if the electric valve is affected with damp. If it is affected with damp, it should be dried. If other problems are found, they should be dealt with in time, and no faulty operation is allowed. For the electric device that has been out of service for more than 3 months, check the clutch before starting, admit that the handle is in manual position, and then check the insulation, steering and electrical wiring of the motor.
2022-12-19
Wuhan Weituo Fluid Control Equipment Co., Ltd
Address: 1706, Building D, Wuhan Living Room, No.8 Hongtu Avenue, Dongxihu District, Wuhan City
Telephone:0086-18942929031 0086-18571829295
Landline:0086-027-83612831
Fax: 0086-027-83612830
E-mail:watosong@watovalve.com
Website:www.watovalve.com
