Maintenance, installation and use of pneumatic control valve
Release time:
2024-10-22 16:18
Pneumatic control valve by the common pneumatic actuator and control valve connection after installation and commissioning of the combination. Pneumatic control valve installation and debugging is extremely important, this paper mainly introduces the pneumatic control valve installation details and skills: the installation process should always comply with the pneumatic control valve installation counseling and attention points.
The operating environment temperature of the regulating valve shall be (-30 ~ +60) and the relative humidity shall not be more than 95% 95%. The relative humidity shall not be greater than the front and rear positions of the regulating valve. There shall be straight pipe sections with a length of not less than 10 times of the pipe diameter (10D), so as to avoid the straight pipe section of the valve from being too short and affecting the flow characteristics. Before installing the valve, read the tutorial manual first. The guidance manual introduces the product and the safety matters and precautions that should be paid attention to before installation and installation.
Consent pipeline cleaning: foreign objects in the pipeline may damage the sealing surface of the valve or even prevent the movement of the valve core, ball or butterfly plate, which makes the valve unable to close correctly. In order to reduce the possibility of a risk situation, it is necessary to clean all piping before installing the valve.
2022-12-19
Wuhan Weituo Fluid Control Equipment Co., Ltd
Address: 1706, Building D, Wuhan Living Room, No.8 Hongtu Avenue, Dongxihu District, Wuhan City
Telephone:0086-18942929031 0086-18571829295
Landline:0086-027-83612831
Fax: 0086-027-83612830
E-mail:watosong@watovalve.com
Website:www.watovalve.com
