Installation steps of several sealing butterfly valves
Release time:
2024-10-22 16:19
Electric hard seal butterfly valve using the principle of three-dimensional eccentric planning, so that the sealing surface of the space trajectory to reach the ideal, sealing surface without friction between each other, no intervention, coupled with the sealing material selected properly, so that the butterfly valve sealing, corrosion resistance, high temperature resistance and wear resistance have been reliably ensured, which has been widely used. Let's talk about the equipment steps of the electric hard seal butterfly valve.
First of all, when the equipment is equipped with the electric hard seal butterfly valve, the equipment manufacturer needs to check the storage condition of the components according to the request, whether it is the same as the specifications of the product. Then the butterfly valve needs to be carefully taken out of the packing box.
Secondly, at this time, we should know that no matter what kind of thing or part of your equipment, you must turn off the power supply before the equipment. If you can, you can also turn off the total power supply. After turning off the power supply, you also need to stop the decompression. This is to ensure that the equipment is closed and decompressed against any unexpected interference.
Finally, when you use or equipment, are not free to change the parts of the electric hard seal butterfly valve. Of course, some processing plants in the use of this butterfly valve, in order to ensure that the medium liquid can be applied to the material touched, the general will use air, water or oil. Of course, when oil is used as a liquid, it is ensured that there will be no change in the working temperature of the parts. This we are completely can believe. Of course, in the process of equipment, this is also very necessary to pay attention to, the choice of medium liquid, to be careful to choose, in order to avoid the selected medium liquid, not suitable for the material touched.
2022-12-19
Wuhan Weituo Fluid Control Equipment Co., Ltd
Address: 1706, Building D, Wuhan Living Room, No.8 Hongtu Avenue, Dongxihu District, Wuhan City
Telephone:0086-18942929031 0086-18571829295
Landline:0086-027-83612831
Fax: 0086-027-83612830
E-mail:watosong@watovalve.com
Website:www.watovalve.com
